Manufacturer of Oil Absorbents, Oil Spill Kits, Spill Safety Equipment and Food Safety Equipment
  • ISO 9001
  • ISO 14001
  • ISO 45001
  • BRCGS
  • HACCP
  • Sedex
melamine rapid test strip

Melamine Rapid Test Strip (Feed)

PROPERTIES

Melamine Rapid Test Strip is a one-step lateral flow immunochromatographic assay that determines a qualitative level for the presence of Melamine and is intended for use in animal tissue. The total test canbe finished within 15 to 20 minutes, this method is suitable for the rapid on-site test.

 

PRODUCT DESCRIPTION

Product Name: Melamine Rapid Test Strip

Specification:50T

Storage Condition: 2-8°C

Intended Use

Melamine Rapid Test Strip is a one-step lateral flow immunochromatographic assay that determines a qualitative level for the presence of Melamine and is intended for use in animal tissue. The total test canbe finished within 15 to 20 minutes, this method is suitable for the rapid on-site test.

Limit of Detection:

1000-2000 μg/kg (μg/kg=ppb)

Scope of Application

Feed

Kit Component

1. Melamine test strips (50/box)

2. Dropper

Interpretation of the Results

A color line always appears in the upper section of the test strip to indicate that the test strip is working properly. This line is the Control Line (C). A line in the lower section of the test strip indicates the test results. This line is the Test Line (T).

Negative Sample (-):2 lines are visible. This indicates the sample contains melamine less than limitations. A negative sample may be determined as soon as 2 lines are visible on the strip. (Please see image above).

Positive Sample (+): Only control line (C) is visible. This indicates the sample contains melamine great than or equal to the limitations. (Please see image above).

Invalid results:

If there is no line in control zone, the test is invalid and the sample should be re-tested by using a valid test strip. (Please see image above).

Note: READ COMPLETELY BEFORE USE!

All reagents and kit components must be at room temperature 20-25°C before use.

1. Remove the package and take appropriate number of test strip.

2. Add 3 to 5 drops of sample solution to the microwell.

3. Incubate for 5 minutes at room temperature (20-25°C ).

4. Interpret test results immediately.

Helping you overcome your technology challengesDiscover more

As India steadily moves towards becoming a more developed nation, Pammvi has been on hand to help its clients both at home and abroad to take advantage….

Contact

India

IndiaHeadquarters
Unit 302, D Wing, Remi Bizcourt, Shah Industrial Estate, Off. Veera Desai Road, Andheri West, Mumbai- 400058
IndiaRegistered Office
Unit 303, D Wing, Remi Bizcourt, Shah Industrial Estate, Off. Veera Desai Road, Andheri West, Mumbai- 400058
+91-22 26731904 info@pammvi.com

Factory

Pammvi Engineering Works LimitedGround Floor,
Achhad Industrial Estate, Achhad Road,
Block Sector: Bhillad, City: Achhad,
Palghar - 401606

Warehouse – Kalbadevi
Copyright © 2023 Pammvi Exports Private Limited. All rights reserved.WordPress Designing by Prateeksha.com