The PT320BC a feature packed batching controller!Compact panel mount 196 W x 48H x 162L (1/4din) 4 component, single bin controller.
- Coarse feed, fine feed, dribble control.
- Built in serial communications.
- Dual display, gross and net simultaneously
- Complete material batching function
- Front panel entry of setpoints
- Setpoint saved during power down
- Discharge control provided
- Out of tolerance checking
- Batch report printout info
- Data setting through RS232/485
- Automatic zero on power up possible
- Functions software programmable
- Digital software calibration
- Easy access rear plug connectors
- Higher A/D conversion rate
- HIgher display resolution
- Integrated weight and setpoint controller
- The batching result can be held by function setting
- Start condition is programmable by function setting
- Automatic tare is programmable by function setting
- Tare check cycle is programmable by function setting
- Compare inhibit timer separated from coarse fine interchange
- Re-batch is possible when actual batched value is less than setpoint
| SPECIFICATIONS | |||
| Maximum Display Resolution Scale Range Step (Division) Linearity Error Conversion Rate Input Sensitivity Zero Point Adjustment Number of Ingredients Switching Capacity (Open Collector) Weight Analogue Output (optional) |
15000 500 to 100000 1, 2, 5, 10, 20, 50 < 0.0067% FSO 200 times per sec. 0.5 mV/V ~ 2 mV/V 0.05 mV ~ 15mV 4 80V, 0.3A max 1 kg 0 ~ 5V or 4~20mA, 0-20mA |
Mains Supply Power consumption Line Filter Excitation Voltage Load Cell Type Operating Temperature Range Relative Humidity Temperature Coefficient (/°C) Dimensions (panel mount) Built in RS232/485 |
110 or 220VAC 50/60Hz 9 VA Built in 10 Vdc, 150 mA max All strain gauge types -10 ~ 50 C (14~122°F) 90% non-condensing <0.0008% reading+3 digits 196W x 48H x 162L (¼din) 2400,4800,9600,19200 7E1 |
| DIMENSIONS |
 |
